Skip to main content

Duramax New AirDog II-4G Fuel Lift Pump Systems

                                                   The NEW! Duramax AirDog II-4G Fuel Pump 
The AirDog® II-4G is the fourth generation fuel system designed to meet the your needs. To achieve this AirDog has manufacture with the highest degree of quality creating a fuel system that requires less maintenance and is engineered with more features to get your diesel running at peak performance.

                                       The AirDog® II-4G is available for modified applications.
This new fuel system will support between 500 and 800 horsepower with a flow rate of 165 gph. It is best suited for light to moderate modifications. Applications available for the fuel delivery system like Dodge, Chevy, and Ford Diesel Pick-ups 
 The patented AirDog® II-4G  is the next generation in the fuel delivery system resulting in a compact, long lasting, efficient, and quiet lift pump.models.
                                                 So, what can the AirDog® II-4G do for you?The benefits of the system are immediately apparent. The removal of contaminants in diesel fuel, such as air, water vapor, and debris provide increases in power and performance.
This is reflected by:
-Smoother idle and acceleration
-Improvement in throttle response
-The elimination of hard starts.
-Long lasting motor
-Sleek and compact one piece body style 
As the amount of air and water in the fuel decreases fuel economy improves which leads to increased in money savings. Removing contaminants allows for pure diesel fuel to enter the combustion chamber through the injectors, safeguarding the engine and providing a full burn which means no more wasted fuel and money in your pocket.

www.toxicdiesel.com

866-488-6942

Popular posts from this blog

Duramax 6.6L Valve Lash Adjustment

Duramax 6.6L Valve Adjustment  Duramax Diesel Pickup Truck This is one method used to set the valve lash on your duramax engine Valve adjustment should be performed anytime the heads are removed. It's also good practice to adjust valves during service that require valve cover remove.  TDC (Top Dead Center) First start with, locating the timing mark on the front engine cover and the harmonic balance.  Rotate the crankshaft in order to bring the number 1 cylinder to TDC (Top Dead Center) of the exhaust stroke. This mark should be aligned with the mark on the engine.  To adjust the valves, start by loosening all the jam nuts with a 14mm wrench, you will also need a flat screwdriver to make the adjustments. Adjust the valve using a .012" feeler gauge Use your .012” feeler gauge between the rocker arm and the valve bridge as pictured. The correct setting is had when there is slight resistance when moving the feeler gauge. It should not...
Read more

Duramax Glow Plugs Operation Glow Plug Relay

                                                    Cold Weather Starts and Glow Plugs  Glow Plug System Description Duramax diesel engine, air alone is compressed in the cylinder. Then, after the air has been compressed, a charge of fuel is sprayed into the cylinder and ignition occurs, due to the heat of compression. Eight glow plugs are used as an aid to starting. The glow plug initial ON time will vary based on the system voltage and temperature. Lower temperatures cause longer ON times all the times. The ECM provides glow plug operation after starting a cold engine. This post-start operation is initiated when the ignition switch  is returned to Run, from the Start position. This operation helps clean up excessive white smoke or poor idle quality after starting. Control of the instant start system, glow plugs is determine...
Read more

Duramax Diesel Allison Transmission Fast Learn Procedure

Duramax Equipped With a Allison Transmission Fast Learn Procedure   Initial Test Automatic 5 or 6 Speed Transmission  In general, Fast Learn is a procedure for Allison 1000 Series transmissions in which a series of tests are run to allow the transmission control module TCM to learn individual Clutch characteristics. Once the clutch data is learned, Fast Learn translates it to the adaptive data cells, which the TCM uses for clutch control during range shifts. Fast Learn is used at GM plants, and allows the vehicle to be driven out of the assembly plant in a near fully adapted state to minimize any customer shift concerns. The scan tool version of Fast Learn is intended to provide the same benefit following transmission repair or replacement at your local shop or Diesel Transmissions Performance Specialist .                                    BD Diesel Power Or...
Read more