Skip to main content

Industrial Injection Diesel Performance Utah

About Industrial Injection Diesel Performance 
Industrial Injection is a family operated business, founded Brady Williams in 1985
  
       
Brady’s initial start in fuel injection was with a local shop, mopping floors after school. By 25, Brady was a master technician at Association of Diesel Specialists for all manufactures of turbochargers and fuel equipment. With hard work, sacrifice and a little help from fate, 30-year-old Brady opened Industrial Injection.
Industrial Injection received its name from servicing construction, agricultural, and mining equipment, as well as, over the road truck engines. It was primarily an agricultural and industrial fuel shop. Industrial Injection has always had an interest in helping farmers, truckers and miners with horse power gains, fuel economy and reduced emissions.

However, when Ford, Dodge and GM decided to power pickup trucks with diesel engines Industrial Injection was forever changed.


First started as a one man band, Industrial Injection is now celebrating 25 years of successful business! Industrial Injection is proud to be a family business and has had many relatives work here, including three of Brady Williams sons:
Shane Williams, at 17, was the first of Brady’s sons to join the family business. He started in the shipping room and then became a Master Technician. After learning all he could about fuel injection he began to expand into turbochargers. Shane has grown the turbo shop into a very successful and major part of what Industrial Injection does.
Cody Williams, at 17, started in the injector room building injectors. He is one of the best fuel injection innovators today. He is responsible for most of Industrial Injection’s performance injectors and modified fuel injection pumps. He has a long list of accomplishments including the leading Power Stroke injectors and the high displacement CP3 fuel injection pumps. Cody leads the company in overall sales and handles the majority of tech support. Customers rely on Cody’s knowledge when they need answers. Brett Williams, the middle son, graduated from college in 2000 before joining the family business. Brett is in charge of marketing, advertising and sales.
Industrial Injection also wouldn’t be here today, if it weren’t for Brady’s wife, Jeroyln Williams, who is the person that actually runs the show at Industrial injection.



866-488-6942

Popular posts from this blog

Duramax 6.6L Valve Lash Adjustment

Duramax 6.6L Valve Adjustment  Duramax Diesel Pickup Truck This is one method used to set the valve lash on your duramax engine Valve adjustment should be performed anytime the heads are removed. It's also good practice to adjust valves during service that require valve cover remove.  TDC (Top Dead Center) First start with, locating the timing mark on the front engine cover and the harmonic balance.  Rotate the crankshaft in order to bring the number 1 cylinder to TDC (Top Dead Center) of the exhaust stroke. This mark should be aligned with the mark on the engine.  To adjust the valves, start by loosening all the jam nuts with a 14mm wrench, you will also need a flat screwdriver to make the adjustments. Adjust the valve using a .012" feeler gauge Use your .012” feeler gauge between the rocker arm and the valve bridge as pictured. The correct setting is had when there is slight resistance when moving the feeler gauge. It should not be so tight th
Read more

Duramax Glow Plugs Operation Glow Plug Relay

                                                    Cold Weather Starts and Glow Plugs  Glow Plug System Description Duramax diesel engine, air alone is compressed in the cylinder. Then, after the air has been compressed, a charge of fuel is sprayed into the cylinder and ignition occurs, due to the heat of compression. Eight glow plugs are used as an aid to starting. The glow plug initial ON time will vary based on the system voltage and temperature. Lower temperatures cause longer ON times all the times. The ECM provides glow plug operation after starting a cold engine. This post-start operation is initiated when the ignition switch  is returned to Run, from the Start position. This operation helps clean up excessive white smoke or poor idle quality after starting. Control of the instant start system, glow plugs is determine by an electronic glow plug control unit and  4.7 volt  glow plugs, requiring  2 seconds  to heat up to  1,000°C (1,832°F)  . The temperature and t
Read more

How to Remove LB7 Duramax Fuel Injectors Step By Step Instructions

LB7 Duramax Diesel 6.6L R&R Remove and Replace  Working on any automobile engine can be intimidating, and that is the very reason why mechanics stay in business, However some tasks that seem intimidating are not actually that difficult if you have the right tools and the right knowledge to complete the task at hand, The following instructions are on how to remove LB7 Duramax Fuel Injectors. This task is often considered a difficult process to complete, but these instructions will break down the process and make this task seem simple. Duramax Diesel LB7 Engine 2001-2004 GMC or Chevrolet Pick-up Truck  Drain the Coolant find the drain valve on the passenger side of the wheel well and drain the coolant. To capture the debris,use a bucket and a cloth for a filter. Caution: This step is very important to ensure the combustion chamber won't fill with coolant during the last step of removing the  fuel injectors if an injector cup pull out during this step.
Read more